Tuesday, May 15, 2018 -
Thursday, May 17, 2018
9:00 AM - 5:00 PM


[SMC-2018-018]-SMC-Code-#420-CAP-EtherNet-IP-Configuration-&-Troubleshooting-asset.png


This is a three-day course designed for technicians and engineers who must deploy and maintain Industrial Automation and Control System (IACS) networks.

This course should prepare you to effectively:

  • Configure a Stratix® switch (5700, 8000, and/or 8300) to meet a variety of network requirements

  • Assign IP addresses to devices on an EtherNet/IP network using rotary switches and a variety of software

  • Monitor switch performance and status

  • Diagnose and resolve issues with switches and devices on a network

 

This course awards 2.1 IACET CEUs.

 

Prerequisites
To successfully complete this course, of the Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals course (CCP146) or equivalent experience, such as downloading project files to a ControlLogix controller is required.


Rockwell Image.jpg (2).png



RegisterToday.png


If you have any questions, contact
Erica Masterson at emasterson@smcelectric.com | 573.334.2861



COURSE SCHEDULE

                                     

Day 1
• Assigning a Computer’s IP Address
• Pinging a Device’s IP Address
• Assigning IP Addresses Using RSLinx Classic Software and Rotary Switches
• Assigning IP Addresses Using BOOTP/DHCP Server Software
• Configuring Stratix 5700 Switch Settings Using the Express Setup
• Creating and Assigning VLANs

Day 2
• Configuring DHCP Persistence
• Configuring Network Address Translation (NAT)
• Configuring Port Security and Traffic Monitoring
• Monitoring Stratix 5700 Switch Status and Performance
• Managing a Stratix 5700 Switch Using a Studio 5000 Logix Designer Project

Day 2 - Advanced Concepts 
• Isolating EtherNet/IP Network Problems
• Diagnosing Problems with EtherNet/IP Modules
• Diagnosing Problems with EtherNet/IP Network Components
• Monitoring an EtherNet/IP Network Using Web-Enabled Technologies
• Troubleshooting a Stratix 5700 Switch
• Updating Stratix 5700 Switch Firmware

 
location.png

LOCATION
SMC Cape Girardeau
2333 Rusmar St. 
Cape Girardeau, MO 63703


cost.png

COST
$1,690
Includes lunch
each day

calendar.png

TIME
Tuesday, May 15 -
Thursday, May 17
9:00 AM - 5:00 PM