PREREQUISITES

To successfully complete this course, of the Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals course (CCP146) or equivalent experience, such as downloading project files to a ControlLogix controller is required.


This is a three-day course designed for technicians and engineers who must deploy and maintain Industrial Automation and Control System (IACS) networks.


This course should prepare you to effectively: ·

      • Configure a Stratix switch (5700, 8000, and/or 8300) to meet a variety of network requirements
      • Assign IP addresses to devices on an EtherNet/IP network using rotary switches and a variety of software
      • Monitor switch performance and status
      • Diagnose and resolve issues with switches and devices on a network

This course awards:  2.1 IACET CEU's.




Download Event Flyer


 

COURSE AGENDA


Day 1

  • Assigning a Computer's IP Address
  • Pinging a Device's IP Address
  • Assigning IP Addresses Using RSLinx
    Classic Software and Rotary Switches
  • Assigning IP Addresses Using BOOTP/DHCP
    Server Software
  • Configuring Stratix 5700 Switch Settings
    Using the Express Setup
  • Creating and Assigning VLANs
Day 2

  • Configuring DHCP Persistence
  • Configuring Network Address Translation (NAT)
  • Configuring Port Security and Traffic Monitoring 
  • Monitoring Stratix 5700 Switch Status and Performance
  • Managing a Stratix 5700 Switch Using a Studio
    5000 Logix Designer Project

Day 3

  • Isolating EtherNet/IP Network Problems
  • Diagnosing Problems with Ethernet/IP Modules
  • Diagnosing Problems with EtherNet/IP
    Network Components
  • Monitoring and EtherNet/IP Network
    Using Web-Enabled Technologies
  • Troubleshooting a Stratix 5700 Switch
  • Updating Stratix 5700 Switch Firmware



If you have any questions, contact
Brandy Meeker at bmeeker@smcelectric.com | 417.865.2825